Fantastic new Glue Sheets from X-Film, if you don’t want to use glue these are very easy to use.
These new sheets are VOC Free and comply with the new ITTF ruling.
Made in Germany.
Perfect for Pimple out rubber without sponge.
Price is for 1 sheet.
Very thin adhesive sheet for attaching ox rubbers to the blade. This adhesive sheet can also be used for long pips with sponge and rubbers with dampening sponges but not for inverted rubbers or short / medium pips with sponge. It is easy to remove from the blade and has almost no effect on the playing characteristics of the rubber.
Assembly instructions for x-film adhesive sheets (adhesive film): Please adhere to these instructions in detail. These adhesive sheets can be used only for rubbers without sponge (ox rubbers).
1. Never use adhesive sheets in cold condition (not below 20 degrees).
2. Adhesive sheets should be applied only on sealed/varnished blades. Varnish must be dry, otherwise the adhesive sheet will create bubbles or the adhesive sheet will damage the blade. We suggest to let the the varnish dry at least 48 hours.
3. Remove the cover sheet (side with the x-film branding/writing). Please note that in any case, this cover sheet has to be removed first. If you attach the adhesive sheet with the wrong side on the blade the ox rubber still can be attached without major problems but the blade may be damaged when pulling of the adhesive sheet. 4. Press the adhesive sheet with the sticking side on the blade.
5. Rub the adhesive sheet very firmly.
6. Cut the adhesive sheet to the size of the blade.
7. Now remove the second cover sheet (the side without the x-film branding/writing).
8. Now you can apply the rubber. Rub firmly. Done!
9. The maximum adhesion is reached after 24h. Initially lower adhesion can be used to remove the glue sheet easily, for example when multiple rubbers should be tested.
| Manufacturer |
|---|
Related products
